The Cable Splicer's Handbook- Ch. 2 Safety

PLAY NOW

Topics in chapter 2 of The Cable Splicer's Handbook are also covered on these videos. A set of 11 disks for all chapters in the cable splicer's book is available here.

Chapter 2  - Safety

Work Area Safety – 10 minutes
Describes personal safety equipment commonly used in underground and URD work areas. Describes procedures for establishing and maintaining safe working conditions. Describes procedures for safely identifying circuits. 

Tools and Test Equipment – 9 minutes
Describes the use of the following: pocket statiscope, phasing tool, remote cable spear, and remote cable cutter. 

Shoring – 9 minutes
Identifies excavation conditions that require shoring. Describes the requirements for safely shoring trenches. Lists some safe alternatives to shoring. 

Atmospheric Testing – 11 minutes
Identifies atmospheric hazards that may be found in vaults and enclosed spaces. Describes or demonstrates how to use an atmospheric test device to determine if the atmosphere in a vault is safe to breathe. Explains how to use ventilation equipment to supply fresh air to an enclosed area. 

Respiratory Protection – 11 minutes
Describes the following types of respirators: half mask with cartridge filters, self-contained breathing apparatus, and demand air-line respirator. Describes how each respirator is inspected, put on, and adjusted for proper fit. 

Vault Emergency – 7 minutes
Describes general safety considerations associated with responding to a vault emergency involving an unconscious worker. 

A Complex Switching Job – 7 minutes
How to remove a switching station from a loop-type distribution system. In this example, the switching procedure involves 16 steps, each of which are explained. Demonstrates the concept of close-before-open when working on loop-type systems. Emphasizes the importance of these steps when disconnecting cables: Isolate, test, ground, and tag

Item Code: 517-CH2-IV
SUBSCRIBE TO WATCH VIDEO
Already a subscriber?